Dept. Textile Laboratory Equipment

||

Dept. Equipement Laboratoires Textiles

||

Abteilung Textil labor Ausruestung

|| tarif webmaster freelance geneve || machines textiles || webdesigner freelance || voyage photographie || forum expert comptable || textile || diplomes expert comptable || thermo conteneur enrobé création de sites internet

LABORATORY MINI-DRYER Model R-3

Suitable for all drying, setting, baking and thermosoling processes. Table model. Sample size up to max. 36x42cm Automatic pin frame transport with preselectable dwell times from 10 sec. to 6 min. Electric heating 6 KW; temperature range 20° -250° C with air circulating fan Specially-designed pin frame to hold all types of sample fabrics in length and/or width Suitable for discontinuous operation with padding mangle, type AIR PAD

LABORATORY HT STEAMER Model H-TS-3

Saturated and HT-Steamer, suitable for the chemical and dyestuff industry, finishing plants, research institutes and general textile industry. Same Basic design as MINI-DRYER, model R-3, owing the wide adjusting ranges regarding temperature humidity, dwelling time, this apparatus can be used for: - Drying, curing and thermo-fixation 20°- 250°C - Steaming with saturated steam 102°C ± 2°C - HT steaming at temperatures between 100°- 250°CTest fabric size max. 350x400mm Automatic pin frame transport with preselectable dwell time from 10sec to 60min. The ceiling is slanted and an additional heating is fixed at the entrance slit in order to avoid a formation of drop water. Moisture controller with regulation 10-100% Steam generator can be supplied on request Suitable for discontinuous operation in conjunction with lab padder, type AIR PAD

LABORATORY MINI TENTER

Continuous type dryer for drying, curing and fixation of samples - Floor model. Can be used for: - Continuous working with endless pin chain - Batch working with pin frame - Width of test samples - Transport by endless pin chain 100-350mm - Transport by pin frame 125-300mm Electronic speed contol for dwell times from 20sec. to 7min Electric heating 18KW; temperature 20°-250°C High drying and thermosoling performance thanks to 3 sets of powerfui air circulating fans 2 sets of full range temperature controllers

COMPUTER COLOR MATCHING SYSTEM

An innovation, LABORTEX CCM system, provides newest concept of color formulation. Normally only storage of 3 concentration levels for each single dyestuff on data-base file are required. The position of target shade with desired accurately recipe will be displayed immediately on the screen by our powerful formulation prediction program. The processing of data-base management will no longer be a boring and time consuming work. Easy to learn, and even easier to use, LABORTEX CCM system is the most friendly and effective color formulation/ measuring / correction tool, you can use today. Spectrophotometer:

MACBETH COLOR-EYE 3100 MACBETH COLOR-EYE 7000 (Option)

Computer system: Pentium IBM Compatible Personal Computer Main software: 1, Data Base Management 2, Combination Management 3, Recipe Prediction 4, Recipe Correction 5, Color-based Correction 6, Calibration 7, Interlace with DOSER system 8, Other Utility

PNEUMATIC-TYPE VERTICAL PADDING MANGLE

- Heavy duty padder with stand, for all dyeing, impregnating and padding processes. Floor model. Roller width 450mm diameter 125mm Pneumatic load adjustment with 3-ton nip pressure at 5 kg/ cm² Padding roller pressure adjustable independently on left/right side Fix revolving speed of 10RPM (vari-speed control system is optional) Padding rollers of 70\' shore hardness (optionally designed for special degree of hardness) Content of liquor trough approx. 1000cc Safety devices include a safety rod to prevent incorrect handling, emergency button and a knee pedal to stop the machine operation Suitable for discontinuous operation in conjunction with our MINI-DRYER or MINI-TENTER Air compressor can be supplied on request

PNEUMATIC-TYPE HORIZONTAL PADDING MANGLE

Dyeing, Finishing and Impregnating Padder, similar to vertical padding mangle. Floor model. Roller width 450mm diameter 125mm Pneumatic load adjustment Fabric speed 10RPM (on request can be supplied with vari revolving speed system) Content of liquor trough approx 1000cc Padding rollers of 70º shore hardness Safty device Air compressor can be supplied on request Suitable for discontinuous operation in conjunction with our MINI-DRYER or MINI-TENTER

WASHING RANGE Small

washing machine for continuous washing processes in conjunction with the pad-steam range, Model PS-JS, PS-J. Available with 4, 6 or 8 washing baths . Stainless stell design, each bath comprising. - Washing trough - Squeezer roller width 350mm, with pneumatic pressure application - Cloth speed control via compensators from 1-5m/ min - Thermostatic temperature control - Direct steam heathing - Fabric contents per washing bath 1-3m - Water spray jet after washing trough Processing time. by timer with buzzer Max, 60min Heating Source: electric heating 15KW (steam heating available on request only)

PAD-STEAM RANGE - Model PS-JS

Suitable for carrying out all PAD-STEAM processes with saturated steam, offers the shortest distance between padder and steaming chamber. Roller: width 300mm diameter 125mm . The range comprises - Horizontal type with two padding rollers, pneumatic pressure application. - Steaming chamber with fabric holding capacity of 6M, with double glazed inspection window. Adjustable fabric speed control, standard dwell time inside the steaming chamber from 20-120sec with digital indication type. Chemicals trough provided about 500cc capacity with automatic drop-off and spray washing. Water sealed bath with temperature regulator for automatic cooling control. Temperature range between 98°-104°C with digital and analog indication type On request can be combined with 2-8 section roller washing machine. Easily accessible control and display panel

PAD-STEAM RANGE - Model PS-JW

Suitable for carrying out all pad-steam processes with saturated steam. Also suitable for wet-on-wet processes. The range comprises: - 1 vertical type with two pad rollers for dyestuff padding roller width 300mm, diameter 125mm, - 1 horizontal type with two pad rollers for chemical padding roller width 300mm, diameter 80mm, - Steaming chamber with fabric holding capacity of 6M, with double glazed inspection window. Adjustable fabric speed control, standard dwell time inside the steaming chamber from 20-120sec. with digital indication type. On request longer dwell time can be allowed for. Water sealed bath with temperature regulator for automatic cooling control. Dyestuff trough about 500cc capacity. Chemical trough about 1000cc capacity with automatic spray cleaning system. Temperature range between 98°-104°C with digital and analog indication type. On request can be combined with simple washing trough.

PAD-STEAM RANGE - Model PS-J

Suitable for carrying out all continuous PAD-STEAM processes with saturated steam, the steaming box is provided with direct steam heating and also indirect steam heating to get maximum temperature 104°C. Roller: width 300mm, diameter 125mm The range comprises: - Vertical type with two padding rollers, pneumatic pressure application, - Steaming chamber with fabric holding capacity of 2.5M. Adjustable fabric speed control, standard dwell time inside the steaming chamber from 30-90 seconds. Chemicals trough provides about 1000cc capacity With water sealed bath Steaming chamber made of SUS304 stainless steel to guarantee durability, insulated on each side On request: Can be combined with 2-8 section roller washing machine Easily accessible control and display panel

PAD-STEAM RANGE - Model PT-J Thermosol range

with infrared zone suitable for working out dye formulas and for research work. Padder -- Infrared ray heater -- Intermediate dryer -- Thermosol On this type of machine the test fabric padded by the horizontal pneumatic type padder is held on its both ends by special clip bars; this complete sample holder is mounted on the chains which are running endlessly through the machine. The test fabric is firstly led through the infra-red pre-heater, then the inter mediate dryer and finally the thermosoling zone. After testing, the test fabric is taken off automatically from the carrying chains and drops down into the reserve box. * Roller width 300mm, diameter 125mm * Dyestuff trough provided about capacity 100cc x 4pcs cross and rotary type * Suitable for: - Operation with no guide cloth - Padder and dryer as individual units

STOCK SOLUTION PREPARATION SYSTEM

- Model Austock AUSTOCK replaces the traditional labor intensive method of preparing stock solution standards in laboratory. AUSTOCK provides both substantial reduction in operating expenses and improvement in quality. As AUSTOCK is computer controlled, the degree of accuracy achieved is without parallel. * Computer system: IBM compatible personal computer. * 14" color display monitor & key board . * Electronic balance weighing range 0-2000g, accuracy + 0.01 g (optional + 0.001 ). * Stirring system: 6 sets direct-drive motor and separate tuning button . * AUSTOCK is provided with two water tanks, water is supplied automatically, temperature controllers are attached to the water tanks respectively. Thus this system is applicable to almost all kinds of dyestuff stock solution. *the date of stock solution is registered, and gives a warning when solutions expire.

LABORATORY DOSING SYSTEM - Model Accu Doser

The textile laboratory processes include dye solution preparation, dye solution dispensing and dyeing cycle control. ACCU DOSER functions independently for both processes of dye solution preparation, and dye solution dispensing, ACCU DOSER is ready to bring your Laboratory technology up-to-date, and significantly improve their accuracy, efficiency and productivity. On Dosing unit: Dosing method : By Gravimetric Weighing Accuracy 2200 + 0.01g Number of Dosing head: 3 ( 2 for dye, 1 for water) Recipe receptors . 16 pots by turntable delivery Number of stock solutions: 100 of dye solutions - 4 of auxiliary On Stock solution preparation. Water tank: 2 tanks, hot & cold tank (automatically refilied) Stirring system. 6 independently stirring stations with adjustable speed control Weighing accuracy. 1 electronic scale 0.01g (Option for 0.001 g scale)

LABORATORY DOSING SYSTEM - Model Twin Doser TWIN DOSER

has two turntables for dosing recipes, and one AUSTOCK area positioned in the middle of machine for stock solution preparation. Due to advanced design, two separate recipes can be dispensed simultaneously from two independently turntables and weighed gravimetrically by two electronic scales for greater speed. During recipe dosing, TWIN DOSER allows the stock solution preparation proceeds in the meantime. For DOSER unit: Stock solution number: 104, capacity 1000o.c. Auxiliary number: 4 Delivery system: 2 independently turntable, each can deliver up to 12 dyepots in a batch with continuously dispensing capabilities. (Special adaptors accommodate any size of dyepots) Dispensing scale: 1 set for each turntable, maximum 2000 ± 0.01 g (2 sets design is optional) For AUSTOCK unit: Water tank: 2 tanks, hot & cold tank (automatically refilled) Stirring system: 6 stirring stations with adjustable speed control Weighing accuracy: 1 electronic scale ± 0.01 g (Option ± 0.001g) Software functions: same as AUSTOCK & RAPID DOSER

LABORATORY DOSING SYSTEM - Model Multi Doser MULTIDOSER

(TWO in ONE system) is a compact combination of AUSTOCK and RAPID DOSER. It is controlled by a PC and has the complete range of software functions available as the AUSTOCK and RAPID DOSER. The Doser\'s 72 stock solutions feed into one dispensing head positioned over an electronic scale. A separate head dispenses final volume water and up to 4 auxiliary chemicals. A turntable with twelve positions delivers recipe receptors to the dispensing area. The same dispensing head houses 3 water tubes and in the center of the turntable are three stirring stations for stock solution preparation. For DOSER unit: Stock solution number: 72, capacity 1000c.c Auxiliaey number: 4 Dispensing method: Gravimetric, one electronic scale for weighing solution (maximum 2000 s± 0.01g) Recipe receptors: 12 pots by turntable delivery Option. Outside scale for automatic weighing the fabric to be dyed. For AUSTOCK unit: Water tank. 2 tanks (Hot & cold water, automatically refilled) Stirring system 3 stirring stations with adjustable speed control

LABORATORY DOSING SYSTEM - Model Rapid Doser

Many conventional laboratories are still using volumetric pipets to dispense dyes and chemicals in preparing a truly accurate dye bath. These procedures are very tedious and time consuming, and has potential sources of variability which will impact the accuracy and repeatability of the overall results. To facilitate automation and to achieve precision, LABORATORY DOSING SYSTEM (RAPID DOSER) is developed with an extremely precise, low cost and easy operation. This new type accommodates max. 104 stock solution bottles and may cover up all dyes put in your general practice. Also, the solution in each bottle is constantly stirred to preserve the homogeneity of the dye solution. As RAPID DOSER is equipped with two sets of electronic reading balances, the dispensing speed is doubled as compared with the other types. Stock Solutions Number. 72 or 104 - capacity 1000c.c Method of dispensing. Gravimetric Dyepot & Receptor\' A conveyor system delivers 24 dyepots with nonstop dispensing capabilities Feed Tube Cleaning. Flush and Wash cycle Dispensing Scale. 2 sets. (Accuracy 0,01g) RAPID DOSER can link directly to LABORTEX CCM system to facilitate recipe dispensing.

LABORATORY DOSING SYSTEM - Model Mini Doser Automating

your dyeing laboratory with cost effective technology can be accomplished, even in the smallest laboratory, with LABORTEX\'s MINI DOSER system. MINI DOSER is a compact design with both functions, dye solution dispensing and dye solution preparation. Basic operating principle as MULTI-DOSER system, but no turntable device is fitted. Suitable for small scale color laboratory, Weighing accuracy. 1 electronic scale ± 0.01 g Number of dosing head: 1 Number of stock solution: 32 or 60 of dye solutions Stirring system 3 independently stirring stations with adjustable speed control

LABORATORY AUTO COATING Application

: For conventional coating production. It is easily to be noted that inconsistent coating - speed causes serious quality problems. This newly designed Auto Coating apparatus is fulfilling the best quality in every coating necessity. Specification : 1 - Squeegee : A/B type 2 - Coating speed : adjustable 3 - Auto stop : back and forth 4 - Electricity : 220V x single phase Limit thickness : 0,1mm (adjustable)

LABORATORY MINI OVEN Mini Oven

has been thoroughly tested and fitted for the following test fields : - Dye production finishing - Thermosol dyeing process - Coating - Raisin recipe test - Hand feeling samples Application 1 - Simulation and Forecasting for raisin curing processes 2 - Fastness, dye and auxiliary test 3 - Topping recipe tests for raisin processes 4 - Research purposes for production : - Temperature - Timing - Auxiliary volume - Feeling sample (22 x 22 cm) - Water repellent, flame resistant and coating - Fabric and texture evenness curing for precise laboratory tests Mechanical characteristic 1 - Automated / timing sample feeding and rejecting 2 - Precise Temperature curing - Heat circulation - Heat direction - Maximum temperature 250°C with tolerance of +/- 1%

LABORATORY DOSING SYSTEM MINI DOSER

32 with stock solution preparation system Automating your dyeing laboratory with cost effective technology can be accomplished, even in the smallest laboratory, with LABORTEX\'s MINI DOSER system. MINI DOSER is a compact design with both functions, dye solution dispensing and dye solution preparation. Basic operating principle as MULTI-DOSER system, but no turntable device is fitted. Suitable for small scale color laboratory. Weighing accuracy : 1 Number of dosing head : 32 or 60 of dye solutions Number of stock solution : 3 independently stirring stations with adjustable speed control Stirring system: 1 electronic scale :t 0.01 g <b><center>Mini Doser 32 Price = USD 35,300.-- Special price = USD 24,000.--

LABORATORY INFRA RED TYPE DYEING MACHINE

- IR DYER Mod. IR-12-P <b>TECHNICAL DESCRIPTION: </b> Heating Compartiment in Stainless Steel. Door equipped with see-through window. Turntable for 12 dye pots of 150 cc or 8 dye pots of 500 cc Infrared radiators, capacity 3 kW 220 V Temp. rise of 0,3ºC to 4ºC per Min, controlled by Microprocesseur LABORTEX Microprocesseur for 2 programs of 8 steps each Cooling by Heat-exchanger Air/Water 130ºC - 60ºC / 5ºC per min. Motor 1/4 HP for the Rotation of the Turntable Speed of Rotation can be regulated from 10-50 R/Min. <b>OPTIONS: </b> M - DATEX MICRO GRAFIC Microprocessor for 99 programs 4096 steps or SEDO PC 1001. C - Manual Injection for auxiliaries <b><center>IR-12-P Special price = ONLY 9,900.-- EURO

LABORATORY IR DYEING MACHINE - IR Dyer IR COLOR

is a compact laboratory IR type dyeing machine, providing a versatile and most importantly, environmentally clean method of sample dyeing, the dye pots are heated from the top by infrared radiators, the inclination angle of the dye pots to the disc is designed to get a good liquor circulation by the rotation of the disc. Temperature range: 20-140°C Heating capacity: 4 kw, Infra-red heating system Cooling. Circulation Air/Water (water for cooling hot air exchanger) Revolution speed: Vari-speed control, 10-50 rpm, Size of dyepots: 550ml: 141 mm (ht.) 76 mm (dia.) 150ml: 141 mm (ht.) 42 mm (dia.)

LABORATORY DYEING MACHINE - Ordinary H Type A versatile HT

& Atmospheric dyeing apparatus for the modern coloring laboratory also suitable for various fastness tests. Temperature Range: 20° –140° C Liquor Ratio: 1 :5 to 1 :100 Volume of Dyepots: 450cc, 300cc, 250cc, 150cc , 100cc Heating Source: Electric Heater No. of potposition: 12 or 24 Control Panel: Program type or microprocessor type Sampel holder & Smoke exhausting device available on request for special application.

LABORATORY DYEING MACHINE - Jumbo HB Type RAPID COLOR,

JUMBO HB TYPE equipped with a special rotary wheel, which can hold JUMBO size dye pots of max 9000cc, and can be used together with ordinary size dye pots. Suitable for special range of applications such as dyeing tests, zippers, panty hose, ropes, label and small lot samples etc. Number and volume of dyepots: -6 dye pots 3000cc -4 dyepots 6000cc -4 dye pots 9000cc Other arrangement of JUMBO size dyepots are available Automatic reversing direction of rotation Other specifications same as ORDINARY H TYPE

OSCILLATING TYPE DYEING MACHINE - Single Bath Type OSCI COLOUR SINGLE BATH TYPE

is a convenient operating atmospheric dyeing machine. Addition of chemicals can be done during the dyeing test. OSCI COLOR is most suitable for the following operations: 1. Atmospheric dyeing 2. Burn-outs (Pe/Cotton) in warm sulfuric acid. 3. Fixing and/or soaping tests. 4. Scouring and/or bleaching tests. Temperature Range: 20° -100°C Liquor Ratio: about 1 :15 or above Type and Volume of Dye pots: 250cc flask 250cc conical flask 450cc flask No. of Potpositions. 12 (other No. are available on request) Heating Source: Electric Heater 4 KW Vari Speed Control: 50-200 oscillations/min

OSCILLATING TYPE DYEING MACHINE - Double Bath Type DOUBLE BATH TYPE

with individual temperature controls are able to carry out simultaneously 2 different dyeing trials. No. of potpositions: 20 (other No. are available on request) Other specifications please refer to single bath type

LABORATORY LEATHER DYEING APPARATUS

A versatile apparatus for dyeing, tanning and other processes in the production of leather, Drum Diameter: 250mm or 150mm No. of Drum: 8 (others avajlable on request) Drum Rotations: 30-60 RPM

DRUM DYEING TESTING MACHINE - Model Drum Color

This drum dyeing machine is designed to make dyeing test on tubular hoses knitted fabrics, which are to be placed into the drum for dyeing . As the drum is partitioned into one, two, or three chambers, each chamber of which is to be put one each of test piece, and rotate, no tangling on each test piece occurs, consequently This will result in no unevenness in dyeing. Drum dimension: 508mm dia. x 508mm length Max. temperature: 98°C with automatic temperature controller Processing time. by timer with buzzer Max, 60min Heating Source: electric heating 15KW (steam heating available on request only)

Lab 4/R GATE offers a serie of small and medium capacity machines in response to the requests of its clientele for equipment capable of handling samples and small lots. These machines work at high temperature or pressure to dye textile fibres in any form: stable fibres, yarn, in hanks, piecegoods and finished garments.

Mod. VO 98 GATE offers a serie of small and medium capacity machines in response to the requests of its clientele for equipment capable of handling samples and small lots. These machines work at high temperature or pressure to dye textile fibres in any form: stable fibres, yarn, in hanks, piecegoods and finished garments.

Lab 6/T GATE offers a serie of small and medium capacity machines in response to the requests of its clientele for equipment capable of handling samples and small lots. These machines work at high temperature or pressure to dye textile fibres in any form: stable fibres, yarn, in hanks, piecegoods and finished garments.

Mod 400 (98C-108C) 5 kg GATE offers a serie of small and medium capacity machines in response to the requests of its clientele for equipment capable of handling samples and small lots. These machines work at high temperature or pressure to dye textile fibres in any form: stable fibres, yarn, in hanks, piecegoods and finished garments.

Mod 400 (98C-108C) 25/75 kg GATE offers a serie of small and medium capacity machines in response to the requests of its clientele for equipment capable of handling samples and small lots. These machines work at high temperature or pressure to dye textile fibres in any form: stable fibres, yarn, in hanks, piecegoods and finished garments.

ATM/208/HT GATE offers a serie of small and medium capacity machines in response to the requests of its clientele for equipment capable of handling samples and small lots. These machines work at high temperature or pressure to dye textile fibres in any form: stable fibres, yarn, in hanks, piecegoods and finished garments

Mod ACR/HT GATE offers a serie of small and medium capacity machines in response to the requests of its clientele for equipment capable of handling samples and small lots. These machines work at high temperature or pressure to dye textile fibres in any form: stable fibres, yarn, in hanks, piecegoods and finished garments.

Mod 108 GATE offers a serie of small and medium capacity machines in response to the requests of its clientele for equipment capable of handling samples and small lots. These machines work at high temperature or pressure to dye textile fibres in any form: stable fibres, yarn, in hanks, piecegoods and finished garments

Mod 550/HT (25kg - 140C) GATE offers a serie of small and medium capacity machines in response to the requests of its clientele for equipment capable of handling samples and small lots. These machines work at high temperature or pressure to dye textile fibres in any form: stable fibres, yarn, in hanks, piecegoods and finished garments

VERTICAL PADDER AIR PAD P-A1

VERTICAL PADDER IN MINT CONDITION -- ONLY USED FOR DEMOS </b> Heavy duty padder with stand, for all dyeing, impregnating and padding processes. Floor model. Roller width 450mm diameter 125mm Pneumatic load adjustment with 3-ton nip pressure at 5 kg/ cm² Padding roller pressure adjustable independently on left/right side Vari-speed control system Padding rollers of 70\' shore hardness Content of liquor trough approx. 1000cc Safety devices include a safety rod to prevent incorrect handling, emergency button and a knee pedal to stop the machine operation Regular Price EURO 9,330 Special Offer EURO 6,800